Single Molecular Nanomedicines Based on Macrocyclic Carrier-Drug Conjugates for Concentration-Independent Encapsulation and Precise Activation of Drugs.

Nanomedicines often rely on noncovalent self-assembly and encapsulation for drug loading and delivery. However, challenges such as reproducibility issues due to the multicomponent nature, off-target activation caused by premature drug release, and complex pharmacokinetics arising from assembly dissociation have hindered their clinical translation. In this study, we introduce an innovative design concept termed single molecular nanomedicine (SMNM) based on macrocyclic carrier-drug conjugates. Through the covalent linkage of two chemotherapy drugs to a hypoxia-cleavable macrocyclic carrier, azocalix[4]arene, we obtained two self-included complexes to serve as SMNMs. The intramolecular inclusion feature of the SMNMs has not only demonstrated comprehensive shielding and protection for the drugs but also effectively prevented off-target drug leakage, thereby significantly reducing their side effects and enhancing their antitumor therapeutic efficacy. Additionally, the attributes of being a single component and molecularly dispersed confer advantages such as ease of preparation and good reproducibility for SMNMs, which is desirable for clinical applications.

Effect of mydriasis on macular and peripapillary metrics in swept-source optical coherence tomography angiography.

Introduction: The study aimed to evaluate the effect of mydriasis on macular and peripapillary metrics with swept-source optical coherence tomography angiography (SS-OCTA) in healthy subjects. Methods: Thirty-five healthy subjects were included. The macular region was scanned by the 3×3mm mode and 6×6mm mode, and the peripapillary region was scanned by the 4.5×4.5mm mode on both eyes with SS-OCTA before and after mydriasis. Macular and peripapillary metrics, including retinal vessel density (VD) and fundus thickness were measured by the built-in program. Data of the right eye were analyzed. Results: The signal strength of the scans was comparable before and after mydriasis (all P>0.05). There were no significant differences in foveal avascular zone (FAZ) parameters and retinal VD of most sectors in both macular and peripapillary areas (all P>0.05). Choroidal thickness was decreased, outer and whole retinal thickness was increased in most of the macular sectors after mydriasis (all P<0.05). Choroidal thickness was decreased in all the peripapillary sectors, but whole retinal thickness and GCC thickness were increased in some peripapillary sectors after mydriasis (all P<0.05). Conclusions: FAZ parameters and retinal VD in the most macular and peripapillary regions are not affected by mydriasis. The thickness of the choroid is decreased after mydriasis, while the thickness of retinal layers in some sectors may be increased after mydriasis.

Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

Three-dimensional positioning of the maxilla using novel intermediate splints in maxilla-first orthognathic surgery for correction of skeletal class III deformity.

OBJECTIVES: Successful orthognathic surgery requires accurate transfer of the intraoperative surgical plan. This study aimed to (1) evaluate the surgical error of a novel intermediate splint in positioning the maxilla during maxilla-first orthognathic surgery and (2) determine factors influencing surgical error. MATERIALS AND METHODS: This prospective study examined 83 patients who consecutively underwent Le Fort I osteotomy for correction of skeletal class III deformity using a novel intermediate splint and a bilateral sagittal split osteotomy. Surgical error was the outcome variable, measured as the difference in postoperative translational and rotational maxillary position from the virtual plan. Measures included asymmetry, need and amount for mandibular opening during fabrication of intermediate splints, and planned and achieved skeletal movement. RESULTS: Mean errors in translation for vertical, sagittal, and transversal dimensions were 1.0 ± 0.7 mm, 1.0 ± 0.6 mm, and 0.7 ± 0.6 mm, respectively; degrees in rotation for yaw, roll, and pitch were 0.8 ± 0.6, 0.6 ± 0.4, and 1.6 ± 1.1, respectively. The transverse error was smaller than sagittal and vertical errors; error for pitch was larger than roll and yaw (both p < 0.001). Error for sagittal, transverse, and roll positioning was affected by the achieved skeletal movement (roll, p < 0.05; pitch and yaw, p < 0.001). Surgical error of pitch positioning was affected by planned and achieved skeletal movement (both p < 0.001). CONCLUSIONS: Using the novel intermediate splint when performing Le Fort I osteotomy allowed for accurate positioning of the maxilla. CLINICAL RELEVANCE: The novel intermediate splint for maxillary positioning can be reliably used in clinical routines.

Three-dimensional evaluation of skeletal stability after surgery-first bimaxillary surgery for class III asymmetry in 70 consecutive patients.

Background/purpose: Skeletal stability after orthognathic surgery is essential for positive treatment outcome. This study evaluated the stability of osteotomy segments after surgery-first bimaxillary surgery for class III asymmetry. Materials and methods: Seventy adults with class III asymmetry consecutively corrected through surgery-first Le Fort I and bilateral sagittal split osteotomies were investigated. Cone-beam computed tomography before treatment (T0), 1-week after surgery (T1), and after all treatment (T2, ≥1-year after surgery) was used to assess surgical movement (T0 to T1) and skeletal stability (T1 to T2) regarding the translation and rotation of the maxillary, mandibular distal, and proximal segments. Results: At T1, the maxillary segment had moved forward and upward, turned to the deviated side, and rotated downward (all P < 0.01). The distal segment of mandible had moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment had moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment had moved upward and tilted to the deviated side (both P < 0.01). At T2, significant relapse occurred in the mandible. The distal segment moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment moved upward and tilted to the deviated side (both P < 0.01). Conclusion: Clinically significant relapse of class III asymmetry was discovered on the mandibular distal and opposite proximal segments.

Chang Gung Forum: An Exemplary Strategy for Implementing a Multidisciplinary Network of Experts in Craniofacial Anomalies.

INTRODUCTION: The Chang Gung Forum has been dedicated to the care of craniofacial anomalies since 2000. This annual continuing medical education program focuses on orofacial cleft and surgery-first orthognathic surgery by providing up-to-date information and management guidelines. This study explored how the Chang Gung Forum has influenced medical perspectives, decisions, and practices in a multidisciplinary craniofacial team. METHODS: Between 2000 and 2022, 20 Chang Gung Forums have been held. A questionnaire was distributed among 170 attendees who had participated in the forum more than once. The questionnaire collected information on the participants' experiences and levels of satisfaction with the educational program and whether or how it had influenced their clinical practice. RESULTS: Valid responses from 86 attendees (response rate, 50.6%) who had participated more than once were collected and analyzed. The overall satisfaction rate of the Chang Gung Forum based on the respondents' most recent visits was 4.28 ± 0.63 out of 5. Of the respondents, 90.9% acknowledged changes in their clinical practice, with modifications in surgery plans and decisions being the most notable (48.5%). In addition, comprehension increased throughout years of attending the annual forum (P < 0.001). CONCLUSION: The Chang Gung Forum has contributed markedly to the community of congenital craniofacial anomalies. The program will continue providing updated information and influencing the clinical decision-making of health care professionals.

Surgery-First Orthognathic Approach for Correction of Dentofacial Deformity in Unilateral Cleft Lip and Palate.

BACKGROUND: Although several studies have reported the advantages of the surgery-first approach for orthognathic correction of class III deformity, there is no report of the success of this approach for patients with cleft lip and palate. Therefore, the purpose of this study was to evaluate the stability and outcome of bimaxillary surgery for cleft-related dentofacial deformity using a surgery-first approach. METHODS: Forty-one patients with unilateral cleft lip and palate who consecutively underwent Le Fort I and bilateral sagittal split osteotomies for skeletal class III deformity were included. Cone-beam computed tomographic scans before surgery, 1 week after surgery, and after orthodontic treatment were used to measure the surgical and postsurgical changes in jaw position by landmarks, and outcomes of jaw protrusion and relation, incisor angle and occlusion, and menton deviation after treatment. Self-report questionnaires regarding satisfaction with overall appearance of the face and seven facial regions were administered after treatment. RESULTS: A clinically insignificant relapse was found in the maxilla (<1 mm) and mandible (<2 mm). There was a significant improvement in the jaw protrusion and relation, incisor angle and occlusion, and menton deviation. Responses from the self-report questionnaires completed after treatment indicated that patient satisfaction was high. CONCLUSION: These findings demonstrate surgical-orthodontic treatment with a surgery-first approach can successfully improve cleft-related dentofacial deformity in patients with unilateral cleft lip and palate. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Surgical occlusion setup and skeletal stability of correcting cleft-associated class III deformity using surgery-first bimaxillary surgery.

BACKGROUND: This study aimed to assess the three-dimensional (3D) quantitative characteristics of the surgical occlusion setup in surgery-first cleft orthognathic surgery, and to evaluate its influence on post-surgical skeletal stability. METHODS: This prospective study was comprised of 35 patients with unilateral cleft lip and palate and class III deformity who consecutively underwent two-jaw surgery with surgery-first approach. Digitized dental models were analyzed to quantify the 3D characteristics of the final surgical occlusion setup. Cone-beam computed tomography was used to measure the 3D surgical skeletal movement and post-surgical skeletal stability. The correlation between skeletal stability and surgical occlusal contact or surgical skeletal movement was also evaluated. RESULTS: The surgical occlusion setup had a large incisor overjet and positive overbite, and buccal cross bite and open bite on second molars. Occlusal contact on three segments was present in 51.4% of the patients, and the average number for tooth contact was 4.3 teeth. No correlation was found between maxillary or mandibular stability and surgical occlusal contact. However, a significant correlation was found between maxillary and mandibular stability and the surgical skeletal movement. CONCLUSIONS: The surgical occlusion for correction of cleft-associated class III deformity using the surgery-first approach was characterized with large overjet and positive overbite, and posterior cross bite and open bite. On average, there was occlusal contact on four to five teeth; half of surgical occlusion setups had contact on three segments. The post-surgical skeletal stability was not related to the surgical occlusal contact but to the surgical skeletal movement.

Four new additions to Helvella (Helvellaceae, Pezizales) from Northern Thailand.

Most species of Helvella have been described from temperate regions in Asia, Europe, and North America, but little is known about the genus from tropical regions. In this report, phylogenetic analyses of 11 newly collected saddle-like fungi from northern Thailand using three genetic markers [the nuclear large subunit ribosomal DNA (LSU), the heat shock protein 90 (HSP90), and the translation elongation factor 1-alpha (TEF)] confirm their assignment in Helvella. Two species were described as new, i.e., Helvella atroides and H. orentitomentosa, and two species, i.e., H. fistulosa and H. rugosa, were reported for the first time in Thailand. Details of macro- and microscopic characters and illustrations were provided for each species. To date, seven species of Helvella have been recorded in Thailand, and a key for identifying the Thai Helvella species was provided here.

The complete chloroplast genome of Rubus pinfaensis, an edible and medicinal dual-purpose plant.

Rubus pinfaensis H. Lév. & Vaniot is of great importance in the phylogeny and evolution amongst Rosaceae, genus Rubus L. plants. The chloroplast genome of R. pinfaensis was reported in this study, which is 155,523 bp in size, with an average GC content of 37.13%. The complete chloroplast genome has a typical quadripartite structure, including a large single copy (LSC) region (85,211 bp) and a small single copy (SSC) region (18,718 bp), which were separated a pair of inverted repeats (IRs, 25,797 bp). This plastome contained 129 different genes (112 unique), including 85 protein-coding genes (79 unique), 36 tRNA genes (29 unique), and 8 rRNA genes (4 unique). The chloroplast genome of R. pinfaensis has completed that will be based on the phylogeny and genomic studies in the family Rosaceae, genus Rubus L.

Indoor CO2 monitoring in a surgical intensive care unit under visitation restrictions during the COVID-19 pandemic.

Background: Indoor CO2 concentration is an important metric of indoor air quality (IAQ). The dynamic temporal pattern of CO2 levels in intensive care units (ICUs), where healthcare providers experience high cognitive load and occupant numbers are frequently changing, has not been comprehensively characterized. Objective: We attempted to describe the dynamic change in CO2 levels in the ICU using an Internet of Things-based (IoT-based) monitoring system. Specifically, given that the COVID-19 pandemic makes hospital visitation restrictions necessary worldwide, this study aimed to appraise the impact of visitation restrictions on CO2 levels in the ICU. Methods: Since February 2020, an IoT-based intelligent indoor environment monitoring system has been implemented in a 24-bed university hospital ICU, which is symmetrically divided into areas A and B. One sensor was placed at the workstation of each area for continuous monitoring. The data of CO2 and other pollutants (e.g., PM2.5) measured under standard and restricted visitation policies during the COVID-19 pandemic were retrieved for analysis. Additionally, the CO2 levels were compared between workdays and non-working days and between areas A and B. Results: The median CO2 level (interquartile range [IQR]) was 616 (524-682) ppm, and only 979 (0.34%) data points obtained in area A during standard visitation were ≥ 1,000 ppm. The CO2 concentrations were significantly lower during restricted visitation (median [IQR]: 576 [556-596] ppm) than during standard visitation (628 [602-663] ppm; p < 0.001). The PM2.5 concentrations were significantly lower during restricted visitation (median [IQR]: 1 [0-1] µg/m3) than during standard visitation (2 [1-3] µg/m3; p < 0.001). The daily CO2 and PM2.5 levels were relatively low at night and elevated as the occupant number increased during clinical handover and visitation. The CO2 concentrations were significantly higher in area A (median [IQR]: 681 [653-712] ppm) than in area B (524 [504-547] ppm; p < 0.001). The CO2 concentrations were significantly lower on non-working days (median [IQR]: 606 [587-671] ppm) than on workdays (583 [573-600] ppm; p < 0.001). Conclusion: Our study suggests that visitation restrictions during the COVID-19 pandemic may affect CO2 levels in the ICU. Implantation of the IoT-based IAQ sensing network system may facilitate the monitoring of indoor CO2 levels.

Outcomes of alveolar cleft repair in complete cleft lip and palate after tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy.

OBJECTIVES: Gingivoperiosteoplasty is often used for reconstruction of alveolar defects in infants with cleft lip and palate. This study aimed to examine outcomes of tertiary gingivoperiosteoplasty, which has not previously been investigated. MATERIALS AND METHODS: This prospective study included 11 adults with complete cleft lip and palate (n = 12 sites) who consecutively underwent segmental Le Fort I osteotomy and concomitant gingivoperiosteoplasty for correction of skeletal class III deformity, nasoalveolar fistula and alveolar cleft. Outcomes included clinical and radiographic evaluations of gingivoperiosteoplasty at the time of osteotomy (presence of nasoalveolar fistula, residual cleft defect and unsupported root ratio of cleft-adjacent teeth), and determination of influencing factors for the clinical success of alveolar cleft repair. Study variables included age, gender, pre-surgical orthodontic treatment and alveolar cleft width of cleft-adjacent canine and angulation between cleft-adjacent teeth before surgery and 1-week postsurgery. RESULTS: Posttreatment, no nasoalveolar fistula remained. The residual cleft defect decreased significantly (p < 0.01). The unsupported root ratio of cleft-adjacent teeth did not differ (p > 0.05); eight cleft sites reached Bergland I or II (67% success). One-week postsurgery, the minimal alveolar cleft width of cleft-adjacent canine was significantly less in the success group compared with the failed group (p = 0.01). CONCLUSIONS: Tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy decreased nasoalveolar fistulas and induced alveolar bone formation. The minimal alveolar cleft width immediately after surgery was the major influencing factor of clinical success. CLINICAL RELEVANCE: Segmental Le Fort I osteotomy with simultaneous gingivoperiosteoplasty efficaciously repairs adult alveolar clefts.

Taxonomy and Phylogeny of Hyphomycetous Muriform Conidial Taxa from the Tibetan Plateau, China.

During the investigation of lignicolous freshwater fungi in the Tibetan Plateau habitat, fifteen collections were isolated from submerged decaying wood. Fungal characteristics are commonly found as punctiform or powdery colonies with dark pigmented and muriform conidia. Multigene phylogenetic analyses of combined ITS, LSU, SSU and TEF DNA sequences showed that they belong to three families in Pleosporales. Among them, Paramonodictys dispersa, Pleopunctum megalosporum, Pl. multicellularum and Pl. rotundatum are established as new species. Paradictyoarthrinium hydei, Pleopunctum ellipsoideum and Pl. pseudoellipsoideum are reported as new records on the freshwater habitats in Tibetan Plateau, China. The morphological descriptions and illustrations of the new collections are provided.

Surgical Stability After Proximal Segment Angle Alteration in Patients With Class III Facial Asymmetry.

PURPOSE: Patients with facial asymmetry often seek improved symmetry in lower face contour resulting in transverse movement of the proximal segments. The study aimed to investigate the association between transverse change in the proximal segments and postoperative relapse after the surgical correction of skeletal Class III facial asymmetry. METHODS: This retrospective cohort study includes consecutive patients with skeletal Class III asymmetry who underwent 2-jaw orthognathic surgery. The primary predictor variable was ramus plane angle (RPA). The patients were grouped as small (S group, <4°) and large (L group, ≥4°) changes in RPA. The primary outcome was the positional change of B point, menton, and the intergonial width. Cone-beam computed tomography images were obtained before surgery (T0), 1 week after surgery (T1), and debond (T2). Intergroup comparison was conducted with independent t test. Correlations between the variables were estimated by Pearson correlation. RESULTS: The study sample was composed of 60 subjects with 30 subjects in each study group. In the S group, the mean surgical changes of RPA were inward rotated 0.91° bilaterally. In the L group, the mean surgical changes of RPA were inward rotated 4.80° and 0.32° on the deviated and non-deviated side. After surgery, further minor inward adaptation of both sides was noted (<1 mm), and intergonial distance reduced with these changes in the proximal segments. By comparing the postsurgical stability between S and L group, the overall sagittal and vertical stability had no significant difference between 2 groups. However, the postsurgical transverse menton relapse (ΔMe in T2-T1) was significantly larger in L group (0.81 ± 1.40 mm) than S group (0.04 ± 1.32 mm) by 0.77 mm (P = .014). CONCLUSION: Greater surgical changes in the proximal segments had minor clinical effect on transverse stability. Minor transverse overcorrection of 1 mm is recommended in cases with severe facial symmetry with extensive changes in the proximal segments.

Predictors of female sexual problems in Shanxi, China: a population-based cross-sectional epidemiologic survey.

Background: Large studies on female sexual function have been conducted globally. Nonetheless, whether the state of female sexual function in China is significantly different from that in the rest of the world is largely unknown. Aim: In this study, we aimed to investigate the associated risk factors for sexual problems in women in Shanxi, China, by conducting a population-based cross-sectional epidemiological survey. Methods: Using the Chinese version of the Female Sexual Function Index (CV-FSFI), we surveyed women aged 20-70 years to diagnose the sexual problems. We used multiple linear regression models to estimate the risk factors for sexual problems. Outcomes: We used the CV-FSFI for investigating the female sexual function. Results: Our results included 6720 women, of whom 1205 were the sexually inactive and 5515 were sexually active. The mean FSFI score for sexually active women was 25.38 ± 4.20 (99% CI 25.27-25.49). Negative numerical coefficients were found for model predictors of age (B = -0.134, P < 0.001), postmenopausal status (B = -2.250, P < 0.001), chronic diseases (B = -0.512, P < 0.001), and gynecologic diseases (B = -0.767, P < 0.001). In contrast, positive numerical coefficients were found for education (B = 0.466, P < 0.001) and cesarean section (B = 0.312, P = 0.009). Clinical Implications: It is important to pay attention to the sexual health of women and explore the factors influencing the sexual problems of women in China. Strengths and Limitations: The present study is to our knowledge the first to evaluate the sexual function of women in Shanxi, China. Answers to questions asked in the CV-FSFI survey may be somewhat subjective, and thus additional tools and documentation are probably needed for accurate assessment. Conclusion: Similarly to other worldwide studies, our study found that increasing age, postmenopausal status, chronic diseases, and gynecological diseases were risk factors for sexual problems, whereas high education levels and cesarean section childbirth were protective factors for sexual problems.

Skin-Based Vaccination: A Systematic Mapping Review of the Types of Vaccines and Methods Used and Immunity and Protection Elicited in Pigs.

The advantages of skin-based vaccination include induction of strong immunity, dose-sparing, and ease of administration. Several technologies for skin-based immunisation in humans are being developed to maximise these key advantages. This route is more conventionally used in veterinary medicine. Skin-based vaccination of pigs is of high relevance due to their anatomical, physiological, and immunological similarities to humans, as well as being a source of zoonotic diseases and their livestock value. We conducted a systematic mapping review, focusing on vaccine-induced immunity and safety after the skin immunisation of pigs. Veterinary vaccines, specifically anti-viral vaccines, predominated in the literature. The safe and potent skin administration to pigs of adjuvanted vaccines, particularly emulsions, are frequently documented. Multiple methods of skin immunisation exist; however, there is a lack of consistent terminology and accurate descriptions of the route and device. Antibody responses, compared to other immune correlates, are most frequently reported. There is a lack of research on the underlying mechanisms of action and breadth of responses. Nevertheless, encouraging results, both in safety and immunogenicity, were observed after skin vaccination that were often comparable to or superior the intramuscular route. Further research in this area will underlie the development of enhanced skin vaccine strategies for pigs, other animals and humans.

An Antitumor Dual-Responsive Host-Guest Supramolecular Polymer Based on Hypoxia-Cleavable Azocalix[4]arene.

The exploitation of specific guests which can respond to external stimuli is the main approach for the construction of stimuli-responsive supramolecular polymers (SPs) based on host-guest interactions. Most functional guests, however, fail to manifest stimuli-responses. Herein, a hypoxia-responsive dimeric azocalixarene (D-SAC4A) with outstanding hosting properties was used as the macrocyclic building block for the preparation of host stimuli-responsive SPs. Since azocalixarenes can also be compatible with stimuli-responsive guests, an antitumor drug, camptothecin (CPT), was chosen and linked via a disulfide-containing linker to afford a glutathione (GSH)-responsive ditropic guest (D-CPT). A unique dual-responsive SP was obtained by 1 : 1 mixing of D-SAC4A and D-CPT in water, which further assembled into SP nanoparticles (DSPNs). DSPNs displayed outstanding stability against dilution and biological interferants, as well as precise CPT-release under GSH and hypoxia conditions. In vitro and in vivo experiments demonstrated the good biosafety and tumor-suppressive effects of DSPNs.

Comparison of regional soft tissue changes after bimaxillary rotational surgery between class III deformity with overbite and open bite: A 3D imaging analysis.

BACKGROUND: This prospective study aimed to compare regional soft tissue changes between patients with class III overbite and open bite deformities treated with bimaxillary surgery involving clockwise and counter-clockwise mandibular setback, respectively. MATERIAL AND METHODS: Class III deformity adults receiving Le Fort I and bilateral sagittal split osteotomies were grouped according to the incisal occlusion: overbite (n = 30) and open bite (n = 30). Combined cone-beam CT scans and 3D facial photographs preoperative and at least 1-year postoperative were taken to assess the soft tissue changes. RESULTS: Postoperative changes for the overbite and open bite groups included anterior repositioning of nose (-0.8 ± 1.2 mm and -1.1 ± 1.1 mm, respectively) and cheek (-1.9 ± 1.3 mm and -1.7 ± 2.6 mm, respectively), posterior repositioning of chin (5.2 ± 4.0 mm and 4.9 ± 3.2 mm, respectively), and medial (-1.7 ± 2.0 mm and -1.9 ± 2.1 mm, respectively) and posterior (2.7 ± 1.4 mm and 2.8 ± 2.3 mm, respectively) repositioning of bilateral angles. Posterior (1.2 ± 2.0 mm and 5.1 ± 3.3 mm) and inferior (-1.4 ± 2.2 mm and -2.4 ± 2.7 mm) repositioning of upper lip and lower lip occurred in overbite group. Inferior (-2.3 ± 2.4 mm) and superior (3.7 ± 3.4 mm) repositioning of chin occurred in the overbite and open bite groups, respectively. CONCLUSIONS: Treatment of class III overbite and open bite deformities with bimaxillary rotational surgery resulted in comparable regional soft tissue changes, except for upper lip, lower lip and chin.